BOVIE A2350-V & A3350 ELECTROSURGICAL GENERATOR

BOVIE A2350-V ELECTROSURGICAL GENERATOR

ELECTROSURGICAL GENERATOR

The Bovie 2350-V is the premier electrosurgery unit from Bovie for Animal Health procedures. This unit is intended for cutting, coagulation, ablation of a variety of tissues. The Bovie 2350-V is suitable for general procedures, tumor removals, and gingivectomy procedures performed in an operating suite and procedure room. The Bovie 2350-V was engineered with the technology and safety of more expensive electrosurgical units but economically priced for animal health practice.

• The Bovie 2350-V offers more electrosurgery modalities than lower watt models including four (4) blend settings, allowing Veterinarians to deliver safe and precise energy applications during more complex surgical procedures.

• Dual monopolar ports can be activated simultaneously in fulguration to control bleeding or treat superficial tissue. The dual ports can also be utilized separately in different modes.

• The Cut II specialized laparoscopic mode is engineered with a lower voltage than competitive units reducing the risk of alternate site burns and increasing patient safety during minimally invasive procedures.

• Bovie FDFS™ technology measures tissue impedance 5,000,000 times a second and adjusts output 5,000 times a second for consistent energy delivery in a variety of tissues.

• Bipolar features are activated using a separate dedicated foot control maintaining sterility during the procedure.

• 10 presets for quick and easy setup.

SPECIALIZED LAPAROSCOPIC MODE

Bovie’s Cut II is tailored specifically for Laparoscopic procedures. The mode offers a precisely managed cutting energy that limits output thereby minimizing the potential risk of capacitive coupling and alternate site burns.

DUAL MONOPOLAR SPRAY ACTIVATION

The Bovie 2350-V offers simultaneous activation in spray with audible activation tones. The simultaneous delivery produces equal and even power outputs in each accessory, for a safer delivery of dual monopolar energy.

ADJUSTABLE POWER DURING ACTIVATION

The power can be adjusted up or down in variable steps while performing a procedure, to increase procedural efficiency and provide the appropriate amount of power to the surgical site.

SURGICAL MEMORY TECHNOLOGY

The 2350-V recalls the last used power and mode. The surgeon can store 10 user-defined RF presets for easy recall.

PATIENT SAFETY FEATURES

• Bovie FDFS™ – The tissue sensing technology measure tissue 5 million times a second and adjusts to varying impedances 5000 times a second for accurate energy delivery.

• Automatic system self-checks upon powering up the unit.

ENERGY SETTINGS

BIPOLAR

Macro

Intense bipolar output allowing for aggressive coagulation, with cut-like effects over a wide range of tissue.Micro

Fine bipolar coagulation for use in extremely gentle and precise surgical applications.Standard

Bipolar coagulation which gently coagulates tissue for minimal tissue damage reducing carbonization and sticking. Maximum power is 50 watts.

 

TECHNICAL SPECS

MONOPOLAR	WATTS	VPEAK MAX VOLTAGE	CREST FACTOR (TYPICAL)	FREQUENCY (KHZ)
Cut I	200	1000V	1.7 ± 20%	490 kHz ± 4.9 kHz
Cut II	200	750V	1.7 ± 20%	490 kHz ± 4.9 kHz
Blend (1)	200	1320V	1.8 ± 20%	490 kHz ± 4.9 kHz
Blend (2)	200	1475V	2.0 ± 20%	490 kHz ± 4.9 kHz
Blend (3)	200	1650V	2.2 ± 20%	490 kHz ± 4.9 kHz
Blend (4)	200	1870V	2.4 ± 20%	490 kHz ± 4.9 kHz
Pinpoint Coagulation	120	1800V	3.1 ± 20%	490 kHz ± 4.9 kHz
Spray Coagulation	120	4000V	6.0 ± 20%	350 to 450 kHz
Gentle Coagulation	120	450V	1.6 ± 20%	490 kHz ± 4.9 kHz

BIPOLAR	WATTS	VPEAK MAX VOLTAGE	CREST FACTOR (TYPICAL)	FREQUENCY (KHZ)
Macro Bipolar	80	600V	1.5 ± 20%	490 kHz ± 4.9 kHz
Micro Bipolar	80	500V	1.5 ± 20%	490 kHz ± 4.9 kHz
Standard Bipolar	50	250V	1.5 ± 20%	490 kHz ± 4.9 kHz

Audible/Visible Output Meter:

Yes

Contact Monitoring Systems

Range/Trip Point:

 

10 ohms or less over entire operating range (10C° to 40°C)

Cooling System:

Passive Cooling

Technology:

Isolated RF Output

Pre-set Feature: 

Yes

Monopolar HP Ports:

2

Dual Activation Tone Alert:

Yes

Connector Ports/Power Switch:

White

Weight:

<9.07 kg (<20 lbs)

Dimensions:

W – 37.5 cm (14.75 in)
H – 16.5 cm (6.5 in)
D – 46 cm (18.1 in)

Warranty:
4 years, Additional Warranty Available

 

BOVIE 3350-V ELECTROSURGICAL GENERATOR

The Bovie 3350-V offers 300 watts of power to facilitate large animal surgical procedures. This innovative energy-based device offers 13 modes of surgical energy delivery. The unit is intended for cutting, coagulation, and ablation of a variety of tissues. The Bovie 3350-V is engineered to meet operating room demands with safety, reliability and precision.

• Tissue sensing AutoBipolar feature automatically activates and delivers bipolar energy without the use a footswitch.
• Bovie FDFS™ technology measures tissue impedance 5,000,000 times a second and adjusts output 5,000 times a second for consistent energy delivery in a variety of tissues.
• Unique to the Bovie 3350-V is the Bovie Bipolar (BBP) mode with pulsing bipolar for tissue fusion and aggressive bleeding control.
• The Bovie 3350-V makes switching from Cut to Coag as easy as pushing the button on the ESPR2 reusable electrosurgery pencil.
• The Gentle Coagulation mode provides a safer, more gentle alternative for effective treatment of delicate and sensitive tissues.
• Ten (10) presets for quick, easy, setup, and an additional 6 bipolar specific presets.

CUT

Cut I

A general cutting with a standard RF waveform used in open and Endoscopic surgical procedure. Cut I is for use in a wide range of tissue with minimal hemostasis.

Cut II

Tailored specifically for Laparoscopic procedures, Cut II offers a precisely managed cutting energy that limits output, thereby minimizing the potential risk of capacitive coupling and alternate site burns due to weakened insulation.

Blend (Level 1, 2, 3 & 4)

Blended cutting offers varying levels of hemostasis during a cut procedure providing increased control of bleeding at the surgical application site.

• Level 1: 75% Duty Cycle
• Level 2: 62.5% Duty Cycle
• Level 3: 50% Duty Cycle
• Level 4: 37.5% Duty Cycle

COAGULATION

Pinpoint

A general coagulation mode delivering rapid desiccation effects with minimal tissue damage.

Spray

Recommended for hemostasis in highly vascular or large surface areas and for non-contact tissue coagulation to control superficial bleeding. Spray mode permits dual, simultaneous activation of two monopolar accessories with audible dual activation tone alert.

Gentle

Gentle mode offers more concentrated coagulation than in other modes. When coagulation is necessary in short amounts of time, reduced electrode carbonization is provided.

 

BIPOLAR

Standard

Bipolar coagulation which gently coagulates tissue for minimal tissue damage reducing carbonization and sticking. Maximum power is 50 watts.

Macro

Intense bipolar output allowing for aggressive coagulation, with cut-like effects over a wide range of tissue.

Micro

Fine bipolar coagulation for use in extremely gentle and precise surgical applications.

Bovie Bipolar

Exclusive to the Bovie 3350-V, Bovie Bipolar is a pulsing bipolar coagulation for quick and powerful coagulation of tissue. Pulsing performance can be tailored specifically to achieve the optimal surgical effect.

TECHNICAL SPECS

MONOPOLAR	WATTS	VPEAK MAX VOLTAGE	CREST FACTOR (TYPICAL)	FREQUENCY (KHZ)
Cut I	300	1000V	1.7 ± 20%	490 kHz ± 4.9 kHz
Cut II	300	750V	1.7 ± 20%	490 kHz ± 4.9 kHz
Blend (1)	200	1320V	1.8 ± 20%	490 kHz ± 4.9 kHz
Blend (2)	200	1475V	2.0 ± 20%	490 kHz ± 4.9 kHz
Blend (3)	200	1650V	2.2 ± 20%	490 kHz ± 4.9 kHz
Blend (4)	200	1870V	2.4 ± 20%	490 kHz ± 4.9 kHz
Pinpoint Coagulation	120	1800V	3.1 ± 20%	490 kHz ± 4.9 kHz
Spray Coagulation	120	4000V	6.0 ± 20%	350 to 450 kHz
Gentle Coagulation	120	450V	1.6 ± 20%	490 kHz ± 4.9 kHz

BIPOLAR	WATTS	VPEAK MAX VOLTAGE	CREST FACTOR (TYPICAL)	FREQUENCY (KHZ)
Macro Bipolar	150	600V	1.5 ± 20%	490 kHz ± 4.9 kHz
Micro Bipolar	80	450V	1.5 ± 20%	490 kHz ± 4.9 kHz
Standard Bipolar	50	300V	1.5 ± 20%	490 kHz ± 4.9 kHz
Bovie Bipolar	225	250V	1.5 ± 20%	490 kHz ± 4.9 kHz
Auto Bipolar	80			490 kHz ± 4.9 kHz

Audible/Visible Output Meter:

Yes

Contact Monitoring Systems

Range/Trip Point:

10 ohms or less over entire
operating range (10C° to 40°C)

Cooling System:

Passive Cooling

Technology:

Isolated RF Output

Pre-set Feature:

Yes

Current Meter:

Yes

Monopolar HP Ports:

2

Dual Activation Tone Alert:

Yes

Connector Ports/Power Switch:

White

Weight:

<9.07 kg (<20 lbs)

Dimensions:

W – 37.5 cm (14.75 in)
H – 16.5 cm (6.5 in)
D – 46 cm (18.1 in)

Warranty:

4 years, Additional Warranty Available

Click here for more Electrosurgical Equipment

Additional information